How to Get a Sparkling Bathtub When You Don’t Have A Maid Service
Here, another question arises: how can you clean your bathtub when it already has water and soap flowing in it? Surely, the method is not baffling. You’re just a few steps away from getting a sparkling bathtub.
Step 1: Get Your Supplies Ready
To set your face against grime and dirt, you’d need the help of some supplies, including:
- Respirator or face mask
- Cleaning gloves
- Safety glasses
- Tile Cleaner
- Baking soda
- All-purpose cleaner
- White distilled vinegar
- Microfiber cloth
- Scrub brush
- Spray bottle
- Clean bucket
Pro tip: Before you start cleaning your bathtub, it’d be good to put safety glasses and rubber gloves on. If you’re using bleach, wear a respirator or a mask, and don’t turn on the bathroom fan to make sure your lungs don’t get harmed. Significantly, this tip is followed by all professional cleaning services.
Step 02: Empty the Bathtub
The next step is to remove all toys, toiletries, and loofas that may be there near your bathtub. Next, wipe down all the things thoroughly. You can see a layer of slimy soap on your toys and toiletries that are needed to be cleaned.
Notably, this is a great way to declutter your bathtub essentials as well. Toss away empty bottles or products that you no longer use. This will keep also keep the sticky remainder left by the dripping pump and caps from getting gathered on the tub edges. If you develop the habit of keeping your belongings clean, you’d never need a maid service again.
Step 03: Clean the Walls and Tiles Around the Bathtub
The walls and tiles of the bathtub are usually pretty dirty and mildewed. Surely, cleaning bathroom tiles is an important part of every house cleaning. You can clean them too easily with the help of a tile cleaner and a scrub brush. Go from top to bottom and make sure t clean every tile thoroughly. Then fully rinse the bathtub while ensuring there’s no cleaner residue.
Next up, spray the walls of your bathtub with an all-purpose cleaner. Wipe down the tiles and walls thoroughly with the help of a microfiber cloth. While doing this, make certain to pay special attention to sticky or dirty spots.
Step 04: Clean Out the Drain
Clearing out the drain is also an important yet very simple step. All you need to do is to put a half cup of baking soda into the drain. Next, pour in some white distilled vinegar. Let it stay there for a couple of minutes so that it can get rid of the clog in the drain. Finish off by flushing the drain with a bucket of hot water.
Step 05: Wipe Down Everything One Last Time
Finally, spray any of the cleaning agents and wipe down the bathtub with a clean cloth. This will give shine to your bathtub and ensure no residue or water sports last. If you think you’re not good at cleaning, you can always get help from a cleaning service.
Final Words
You don’t always need a maid service to keep your bathroom and bathtub clean. By following some simple steps, you’re sure to have a clean, squeaky bathtub in no time.
Comments
Post a Comment